Description
The TOMLIN INSTRUMENTS TMI-UT-105 measures wall thickness from one side where an ordinary pulse-echo gauge struggles: heavy near-surface corrosion, cast iron and other coarse-grained materials, aluminium, small-diameter tube, very thin or very thick sections and rough surfaces.
A live colour A-scan shows the echo so the operator can confirm every reading, with adjustable gain, gate height and blanking to reject clutter. The live B-scan shows the cross-section under the probe and captures the minimum. Echo-echo mode measures through paint and coatings, and the data logger stores 100,000 readings and 1,000 waveforms.
Features
- Live colour A-scan and B-scan with minimum capture
- Adjustable gain, gate height and blanking
- Echo-echo through-coating mode
- RF and half/full-wave rectification
- Data logger with USB and PC software
Specifications
| Display | 2.4 inch (320 × 240) colour LCD |
| Measuring range | 0.50 – 508 mm (0.025 – 20.00 in), depending on material, probe and surface |
| Resolution | 0.01 mm or 0.1 mm (0.001 in or 0.01 in), selectable |
| Material velocity range | 500 – 9,999 m/s |
| Alarms | Minimum and maximum, with reading colour change |
| Data logger | 100,000 readings, 1,000 waveforms, 400 grid files (21 × 12) |
| Interface | USB 2.0 with PC data software |
| Power supply | 2 × 1.5 V AA batteries, 24 h standby; auto-off 5, 10 or 20 min |
| Operating temperature | -10 – 50 °C |
| Size | 153 × 76 × 37 mm |
| Weight | 280 g including batteries |
Compatible probes
| Type | Frequency | Contact diameter | Measuring range | Temperature |
| Standard | 5 MHz | 10.6 mm | 0.8 – 100.0 mm | -10 – 60 °C |
| Standard configuration | 5 MHz | 13.1 mm | 1.2 – 200.0 mm | -10 – 70 °C |
| Composite element | 5 MHz | 13.1 mm | 1.0 – 200.0 mm | -10 – 70 °C |
| Cast iron | 2 MHz | 17.5 mm | 4.0 – 508.0 mm | -10 – 70 °C |
| Small tube | 7.5 MHz | 9.1 mm | 0.8 – 30.0 mm | -10 – 70 °C |
| Fingertip | 10 MHz | 7.3 mm | 0.7 – 12.0 mm | -10 – 70 °C |
| High temperature | 3 MHz | 14.2 mm | 4.0 – 80.0 mm | -20 – 480 °C |
Industries Used In
- Corrosion and remaining-wall surveys
- Through-coating measurement on painted plant
- Castings and coarse-grained materials
- Thin-wall and small-diameter tube