Overview
The AGH6600 six-gas detector combines a built-in sampling pump with measurement of combustible gas as %LEL, oxygen, carbon monoxide, hydrogen sulphide, sulphur dioxide and carbon dioxide. This is a custom, supplied-to-order six-gas configuration, not one of the two- or four-gas versions of the same instrument. AIYI's standard six-gas literature may show ammonia in place of carbon dioxide; this product page and the final quotation define the sensor set supplied.
Key features
- LEL, O2, CO, H2S, SO2 and CO2 monitoring in one instrument.
- Integrated pump for use with suitable sampling probes and hose.
- LCD display and stored measurement data.
- Audible, LED and vibration alarms.
- Rechargeable design with USB Type-C charging.
- Protective PC/TPU enclosure with manufacturer-stated IP66 protection.
Applications and selection
For industrial maintenance, utilities and process-area sampling where the site assessment requires this six-gas combination. This configuration adds SO2 and CO2 measurements to LEL / O2 / CO / H2S. It does not include NH3 or NO2 sensors; alternative combinations in general product literature are not automatically included. Confirm that the selected sensor ranges and sampling arrangement match the application.
Specifications
| Model | AGH6600 |
|---|---|
| Combustible gas (LEL) | 0–100 %LEL |
| Oxygen (O2) | 0–30 %vol |
| Carbon monoxide (CO) | 0–1,000 ppm |
| Hydrogen sulphide (H2S) | 0–100 ppm |
| Sulphur dioxide (SO2) | 0–20 ppm |
| Carbon dioxide (CO2) | 0–5 %vol |
| Sampling | Built-in pump |
| Display / alarms | LCD / audible, LED and vibration |
| Enclosure | PC/TPU; manufacturer-stated IP66 |
| Dimensions | 177 × 76.5 × 40 mm (H × W × D) |
| Operating temperature | −20 to +60 °C; selected sensor restrictions also apply |
| Charging | USB Type-C |
Confirm the final sensor schedule, combustible-gas calibration and ranges on the order documentation.
Standards and compliance
Match the approval marking and certificate scope to the exact supplied model and gas configuration before hazardous-area use. Follow the manual for calibration, alarms and sampling. A built-in pump does not remove the need to assess sampling-line suitability or allow for sample transit and instrument response times.
Included and optional accessories
One AGH6600 with built-in pump and the LEL / O2 / CO / H2S / SO2 / CO2 sensor configuration. Confirm the charger, probe, hose and filter packing list when ordering. Calibration cap, calibration gas, regulator and accredited calibration must be specified separately and are not included unless expressly quoted.
Compare the gas detection range
This page: LEL / O2 / CO / H2S / SO2 / CO2, AGH6600 with built-in pump. Each listing is a separate instrument configuration; only its stated gases are measured.
| Instrument / gases | Model | Sampling |
|---|---|---|
| Oxygen (O2) | AGH5200 | Diffusion |
| Carbon monoxide (CO) | AGH5200 | Diffusion |
| Hydrogen sulphide (H2S) | AGH5200 | Diffusion |
| Ammonia (NH3) | AGH5200 | Diffusion |
| Sulphur dioxide (SO2) | AGH5200 | Diffusion |
| Nitrogen dioxide (NO2) | AGH5200 | Diffusion |
| Four-gas: LEL / O2 / CO / H2S | AGH6200 | Diffusion |
| Four-gas: CO / O2 / NH3 / NO2 | AGH6200 | Diffusion |
| Dual-gas: H2S / SO2 | AGH6200 | Diffusion |
| Six-gas: LEL / O2 / CO / H2S / SO2 / CO2 | AGH6600 | Built-in pump |
| Four-gas: CO / O2 / NH3 / NO2 | AGH6600 | Built-in pump |
| Dual-gas: H2S / SO2 | AGH6600 | Built-in pump |
| Gas sampling pump | AGH1000B | External pump; detector required |
This comparison is not a universal compatibility list. Confirm sensor ranges, sampling accessories and certificate scope for the application. Browse gas detection and environmental safety equipment.
Datasheet
Read the manufacturer document with the exact six-gas configuration above and the final quotation. This listing includes CO2 and SO2; other illustrated sensor combinations are not included.
Download the AGH6600 manufacturer datasheet (PDF)
Applications
- Confined-space entry and pre-entry testing
- Oil, gas, chemical and wastewater facilities
- Plant maintenance and shutdown work
- Occupational safety and emergency response