Overview
This AGH6200 is a custom, supplied-to-order specialist four-gas detector configured for carbon monoxide, oxygen, ammonia and nitrogen dioxide. It uses diffusion sampling with no built-in pump and provides audible, visual and vibration alarms. The sensor combination is different from the standard LEL / O2 / CO / H2S four-gas package.
Key features
- Simultaneous CO, O2, NH3 and NO2 monitoring in one instrument.
- Diffusion sampling without an internal pump.
- Rechargeable battery and protective PC/TPU housing.
- Audible, LED and vibration alarms.
Applications and selection
For industrial maintenance, plant inspections and process-area checks requiring this exact combination of toxic-gas and oxygen measurements. This configuration does not measure combustible gas as %LEL or hydrogen sulphide. Choose the standard four-gas listing for LEL / O2 / CO / H2S, or the corresponding AGH6600 specialist listing when a built-in pump is required.
Specifications
| Model | AGH6200 |
|---|---|
| Carbon monoxide (CO) | 0–1,000 ppm |
| Oxygen (O2) | 0–30 %vol |
| Ammonia (NH3) | 0–100 ppm |
| Nitrogen dioxide (NO2) | 0–20 ppm |
| Sampling | Diffusion; no built-in pump |
| Power | Rechargeable 3.7 V, 2,200 mAh lithium battery |
| Alarms | Audible, LED and vibration |
| Enclosure | PC/TPU; manufacturer-stated IP66 |
Confirm the final sensor schedule and ranges on the order documentation. Only the four gases specified above are measured.
Standards and compliance
Match the approval marking and certificate scope to the exact supplied model and gas configuration before hazardous-area use. Follow the operating instructions and site procedures for calibration and alarm settings. This listing is not the AGH6200F fire-service version.
Included and optional accessories
One AGH6200 with CO, O2, NH3 and NO2 sensors. Confirm the charger and packing list when ordering. A suitable external sampling system and calibration cap can be specified separately, subject to compatibility. Calibration gas, regulator and accredited calibration are not included unless expressly quoted. The photograph shows the common AGH6200 housing; this page specifies the specialist sensor configuration.
Compare the gas detection range
This page: CO / O2 / NH3 / NO2, AGH6200 diffusion. Each listing is a separate instrument configuration; only its stated gases are measured.
| Instrument / gases | Model | Sampling |
|---|---|---|
| Oxygen (O2) | AGH5200 | Diffusion |
| Carbon monoxide (CO) | AGH5200 | Diffusion |
| Hydrogen sulphide (H2S) | AGH5200 | Diffusion |
| Ammonia (NH3) | AGH5200 | Diffusion |
| Sulphur dioxide (SO2) | AGH5200 | Diffusion |
| Nitrogen dioxide (NO2) | AGH5200 | Diffusion |
| Four-gas: LEL / O2 / CO / H2S | AGH6200 | Diffusion |
| Four-gas: CO / O2 / NH3 / NO2 | AGH6200 | Diffusion |
| Dual-gas: H2S / SO2 | AGH6200 | Diffusion |
| Six-gas: LEL / O2 / CO / H2S / SO2 / CO2 | AGH6600 | Built-in pump |
| Four-gas: CO / O2 / NH3 / NO2 | AGH6600 | Built-in pump |
| Dual-gas: H2S / SO2 | AGH6600 | Built-in pump |
| Gas sampling pump | AGH1000B | External pump; detector required |
This comparison is not a universal compatibility list. Confirm sensor ranges, sampling accessories and certificate scope for the application. Browse gas detection and environmental safety equipment.
Datasheet
The general manufacturer datasheet covers the AGH6200 platform. Read it together with the CO / O2 / NH3 / NO2 sensor schedule on this page and the final quotation.
Download the AGH6200 manufacturer datasheet (PDF)
Applications
- Confined-space entry and pre-entry testing
- Oil, gas, chemical and wastewater facilities
- Plant maintenance and shutdown work
- Occupational safety and emergency response