Overview
The AGH5200 nitrogen dioxide detector is configured to measure NO2 from 0–20 ppm. This rechargeable single-gas instrument displays the measured concentration and provides audible, visual and vibrating alarms. It is supplied with the NO2 sensor specified on this page.
Key features
- Electrochemical nitrogen dioxide sensor.
- Diffusion sampling without a built-in pump.
- LCD display, single-button operation and three alarm methods.
- Rechargeable battery in a protective PC/TPU housing.
Applications and selection
For industrial workplace checks and process-area inspections where nitrogen dioxide is the specified monitoring requirement. This is an NO2 detector, not a nitrogen (N2), nitric oxide (NO) or general nitrogen-oxides analyser. It does not monitor oxygen or combustible gas. Compare the CO / O2 / NH3 / NO2 models below when that exact combination of measurements is needed.
Specifications
| Model | AGH5200 |
|---|---|
| Gas measured | Nitrogen dioxide (NO2) |
| Measurement range | 0–20 ppm |
| Sensor / sampling | Electrochemical / diffusion |
| Power | Rechargeable 3.7 V, 1,500 mAh lithium battery |
| Display / alarms | LCD / audible, LED and vibration |
| Housing | PC/TPU |
Standards and compliance
Match the certificate and approval marking to the exact supplied model and sensor before specifying hazardous-area use. Follow the instrument instructions and site procedures for calibration, alarm settings and use.
Included and optional accessories
One rechargeable AGH5200 fitted with an NO2 sensor. Confirm the charger and final packing list when ordering. A calibration cap and compatible sampling accessories may be specified separately. Calibration gas, regulator and accredited calibration are not included. The photograph shows the common AGH5200 housing; the supplied sensor is NO2. This is not the AGH5200M.
The manufacturer document covers the AGH5200 / AGH5200M series; this page specifies the rechargeable AGH5200 NO2 configuration.